FAQ About Absolute Refrigerants

All of our products ship from Arizona and must be transported via ground due to hazardous material regulations. This means they cannot be shipped by air and are handled in accordance with all DOT requirements, including full hazardous documentation.

Estimated delivery times:
• Arizona to New York: 8–10 business days
• Arizona to Texas: 3–6 business days
• Other U.S. locations: generally 4–10 business days, depending on distance from Arizona

Handling time: Orders are typically processed in the order they are received. Due to high daily volume, not all orders ship the same day they are placed.

If you need faster dispatch, we offer a “Ship It Today” option that prioritizes your order and reduces handling time by 1–2 business days. This service ensures your order ships out the same day when placed before our cutoff time, which is orders recieved before 1pm MST on Monday to Friday.

Tracking: All shipments include tracking information, which will be provided via email once your order ships.

Note: Delivery times do not include weekends or holidays and may be affected by factors such as weather, carrier delays, or increased seasonal demand.

Any individual or business can purchase refrigerant from us. However, it’s important to know that only licensed HVAC professionals are the only legally permitted people to install or add refrigerant to an air conditioning system. When you purchase from us, you agree that the person handling the refrigerant is a licensed HVAC technician.

No, you do not need a license to purchase refrigerant. However, the person who actually installs or adds the refrigerant to your AC system must be a licensed HVAC professional, as required by federal regulations.

These regulations are designed to protect environmental safety and ensure proper handling of potentially harmful chemical substances. Licensed HVAC technicians are trained in safe installation, proper measurement, and environmental compliance.

Freon is a brand name for a group of synthetic refrigerants, specifically chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs), initially developed by DuPont (now part of Chemours) in the 1930s.

These compounds are made up of carbon, chlorine, fluorine, and sometimes hydrogen, and they were widely used in refrigeration, air conditioning, and as propellants in aerosol cans due to their stability, low toxicity, and effective heat-transfer properties.

The most well-known Freon compounds include Freon-12 (CCl₂F₂, dichlorodifluoromethane) and Freon-22 (CHClF₂, chlorodifluoromethane). However, many of these substances were found to deplete the ozone layer when released into the atmosphere, leading to their phase-out under the Montreal Protocol, an international treaty signed in 1987. Today, “Freon” is sometimes used informally to refer to refrigerants in general, though modern replacements like hydrofluorocarbons (HFCs) or other alternatives (e.g., R-134a, R-410A) have largely taken their place in newer systems. Freon is a historically significant refrigerant that revolutionized cooling technology but has been mostly replaced due to environmental concerns.

You typically don’t need to replace the refrigerant in your air conditioning (AC) system on a regular schedule because it’s designed to last the lifetime of the unit. Unlike motor oil in a car, refrigerant isn’t consumed or used up during normal operation—it circulates in a closed-loop system, absorbing heat from inside your space and releasing it outside. So, under ideal conditions, you shouldn’t have to “replace” it at all.
However, if your AC isn’t cooling properly, it might be low on refrigerant, which usually means there’s a leak. Common signs include warm air blowing from the vents, hissing noises, or ice buildup on the evaporator coils. Leaks can happen due to wear and tear, corrosion, or damage to components like the coils, lines, or fittings.

You can’t directly check refrigerant levels yourself since it’s in a sealed system and requires specialized tools like pressure gauges and a manifold set, which only certified HVAC technicians should handle. However, there are clear signs that your air conditioner might be low on refrigerant, usually due to a leak. Here’s what to look for:
  1. Weak Cooling: If the air coming from your vents isn’t as cold as it used to be—or feels more like a weak breeze than a blast of cool air—low refrigerant could be the culprit. The system relies on refrigerant to absorb and transfer heat, so less of it means less cooling power.
  2. Longer Running Times: If your AC runs constantly but struggles to reach the set temperature on your thermostat, it might not have enough refrigerant to efficiently remove heat.
  3. Ice on the Evaporator Coils: Low refrigerant can cause the coils to get too cold, leading to condensation freezing on them. Check the indoor unit (often in a basement, attic, or closet)—if you see frost or ice buildup, it’s a red flag.
  4. Hissing or Bubbling Noises: A refrigerant leak might make audible sounds. Hissing could mean gas escaping from a small hole, while bubbling might indicate a larger breach. Listen near the indoor or outdoor unit.
  5. Higher Electric Bills: If your AC is working harder to compensate for low refrigerant, it’ll use more energy, spiking your costs without delivering better results.
  6. Warm Air from Vents: Put your hand near a vent. If the air feels lukewarm or barely cool (especially when it’s set to a low temp), the refrigerant charge might be off.
   So, if you spot these signs, skip the guesswork and get a technician to diagnose it. They’ll tell you if it’s really a refrigerant issue or something else, like a clogged filter or broken fan.

The cost of refrigerant for your air conditioner depends on the type you need, the amount required, and market factors like availability and location.
  • R-410A (Puron): This is the standard for most residential AC units made after 2010. It typically costs $50 to $100 per pound when installed by a technician. A typical 2- to 3-ton home AC needs 6 to 12 pounds, so a full recharge might run $300 to $1,200, not including labor. Note that R-410A is being phased out starting January 1, 2025, for new systems under EPA rules, but it’s still available for existing units. Prices might creep up as production drops over the next decade.
  • R-22 (Freon): Used in older systems (pre-2010), R-22 is much pricier because it’s been phased out since 2020—no new production or imports allowed in the U.S. It now costs $100 to $250 per pound, sometimes higher due to scarcity. For a 2- to 3-ton unit needing 6 to 12 pounds, you’re looking at $600 to $3,000 or more. Supply is dwindling, so costs fluctuate wildly based on what’s left in stock.
  • Newer Refrigerants (R-32, R-454B): Starting in 2025, new AC systems will use these lower-GWP (Global Warming Potential) options. Pricing isn’t fully standardized yet, but early estimates suggest $90 to $150 per pound, similar to or slightly above R-410A. These aren’t relevant for recharging older systems, though—they’re for new units only.

Refrigerants are being phased out due to their environmental impact, and this process has been underway for decades, driven by international agreements like the Montreal Protocol and newer regulations targeting climate change. The phase-out you’re likely hearing about now involves hydrofluorocarbons (HFCs) like R-410A, which replaced older ozone-depleting refrigerants like R-22 (Freon). While HFCs don’t harm the ozone layer, they’re potent greenhouse gases with high Global Warming Potential (GWP), so they’re being targeted under the Kigali Amendment to the Montreal Protocol and U.S. laws like the AIM Act of 2020.

You don’t need to convert your existing R-22 air conditioner to a different refrigerant right now—it’s not legally required, and your system can keep running as long as it’s functional and you can source R-22 for repairs. If your current system is still working, you may be able to get away with just replacing parts and components. For example, if you’re having trouble with the compressor or condenser, you might be able to replace those components and keep your existing system. This is a good option if you’re on a budget or want to avoid having to buy an entirely new system.

We want to make sure our customers are satisfied with their purchases. If you have any other questions, please contact us at contact@absoluterefrigerants.com or (480) 625-4214.

Save Money with Absolute Refrigerants

Absolute Refrigerants offers you a way to save money on your HVAC system by offering different refrigerants.

We have been in the refrigerant business for many years and have watched the industry change with technological advancements and new laws. We have always been able to provide our customers with the best quality products at an affordable cost, we understand that not everyone wants to pay high prices for their refrigerant.

That is why we are offering bulk quantities at very low costs. This will allow you to save money while still using a top-quality product that will keep your system running efficiently.

If you would like more information on how Absolute Refrigerant can help you save money, please contact us today!

Customer Reviews

paypal buyer protection
Services
acca member final

Pay Securely with Paypal Buyer Protection

$0 LIABILITY
180 DAY PAYPAL BUYER PROTECTION COVERAGE
RESOLUTION SUPPORT